velorian e-bike turn signal set configurable with a double pushbutton/switch for AZUB Tricon 26 inch with luggage carrier

External CNC push-button control with 2 buttons from Daytona in high-quality aluminium housing as an alternative to 2 separate buttons on the handlebar.

> DAYTONA External CNC push-button fitting with 2 buttons, black <

A double push button from HIGHSIDER in a high-quality aluminium housing as an alternative to 2 separate buttons on the handlebar.

> HIGHSIDER CNC push button switch with 2 buttons, black <

With running light turn signals on the bike, you are way ahead. The short design reduces vibrations and oscillations, which reduce the service life of the indicator.

> 1 pair 12 volt rubber mounted short LED running light turn signal <

Small, discreet and yet impossible to miss. The flexible indicator neck ensures a long service life

> 1 pair of rubber mounted oval mini LED turn signals tinted glass with black nut and black washer <

Increase visibility with High Quality Universal LED running light indicators.

The outstanding design paired with the long service life of LED turn signals enhances any vehicle.

The longer design accentuates the running light.

Approved for front and rear.

> 1 pair of rubber-mounted running light indicators edge Pro Black <

Sensation

With the Atto®/Atto® Dark we made the almost impossible possible: This indicator is extremely small and spectacularly bright at the same time. Compact and illuminating power: With this combination the Atto®/Atto® Dark is a real sensation!

This is our most compact indicator ever. For comparison: The light surface of the Atto®/Atto® Dark would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto®/Atto® Dark basically disappears on the motorcycle. This indicator will only grab your attention when it really has to!

The Atto®/Atto® Dark flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! We advise not to look for too long into the beam of this little power house.

The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology.

The complete electronics of the Atto®/Atto® Dark are in the casing, this indicator can be plugged into the 12 volt net directly.*

* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.

ECE-tested for front and rear

• sensationally small, spectacularly bright
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5x0,5x6,5 fastening screw
• Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm
• European design protection

> 1 pair Kellermann Atto Dark, LED mini indicator, tinted glass, front and rear on both sides <

An edge in disguise

The Rhombus series is extended and now presents itself in a particular compact version! The drastic reduction in size allows for completely new design standards on the motorcycle: when not in use its miniature format and the characteristic tinted glass take undercover to the next level. In action however the high performance LEDs provide a spectacularly bright light, which Kellermann indicators are now for! The well-known Kellermann HighPower LED Technology** and the new EXtranz- Extreme Optical Transparency Technology enable an optimized light channeling. As the complete electronics of the Rhombus S Dark are in the casing, this indicator can be plugged into the 12 volt net directly.*Combined at front and back the offer a perfect look. Suitable for all motorcycle models.*

^{* Electronical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction.}

ECE-tested for front and rear

• Strongly tinted glass – spectacularly bright
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5 x 0,5 x 6,5 mm thread
• European design protection

> 1 pair Kellermann Rhombus S Dark, LED indicator, tinted glass <

Sensation

With the Atto® we made the almost impossible possible: This indicator is extremely small and spectacularly bright at the same time. Compact and illuminating power: With this combination the Atto® is a real sensation!

This is our most compact indicator ever. For comparison: The light surface of the Atto® would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto® basically disappears on the motorcycle. This indicator will only grab your attention when it really has to!

The Atto® flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! We advise not to look for too long into the beam of this little power house.

The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology.

The complete electronics of the Atto® are in the casing, this indicator can be plugged into the 12 volt net directly.*

^{* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.}

ECE-tested for front and rear

• sensationally small, spectacularly bright
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5x0,5x6,5 fastening screw
• Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm
• European design protection

> 1 pair Kellermann Atto, LED mini indicator, black, front and rear on both sides <

Intelligently disguised

The micro S Dark belongs to the compressed version "S" of the famous Kellermann micro 1000® series.In the new format, the micro S Dark reflects the strong trend towards even more compressed lights and opens up new design possibilities for motorcycles. Due to the drastic size reduction and the strongly tinted indicator’s glass, the "indicator" component disappears almost completely.
In action however the high performance LEDs provide a spectacularly bright light, which Kellermann indicators are now for! The well-known Kellermann HighPower LED Technology** and the new EXtranz®- Extreme Optical Transparency Technology enable an optimized light channeling. As the complete electronics of the micro S Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* Combined at front and back the offer a perfect look. Suitable for all motorcycle models.*

* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.

ECE-tested for front and rear

• Strongly tinted glass – spectacularly bright
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Long Life Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5 x 0,5 x 6,5 mm thread
• European design protection

> 1 pair Kellermann indicator Micro S Dark, black, tinted glass, for front and rear <

A brilliant edge

The Rhombus S Extreme is one of the brightest Kellermann indicators available so far. In combination with a drastic reduction in size new design standards are set – not only for motorcycles! The Rhombus S Extreme is allowed for use on multiple applications including quads, cars and trailers (homologated according to ECE-R6). On motorcycles this indicator can be installed within twenty millimetres of the main headlamp, thus blending seamlessly into the visual appearance of the bike.

Three LEDs and the Kellermann HighPower LED Technology** generate an impressive and previously unattained bright signal. Due to this greater illumination power it is recognized more quickly in traffic providing for maximum road safety.*

^{* Electronical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.}

ECE-tested for front and rear

Applicable on all vehicles
(e. g. motorcycles, quads, cars, Super Seven, trailers, etc.)

• Extreme light power and brilliant optic
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5 x 0,5 x 6,5 mm thread
• European design protection

> 1 pair Kellermann Rhombus S Extreme, LED indicator, black, front & rear <

LED built-in indicator for almost invisible installation. The HIGHSIDER STAR-MX1 PRO can be fitted in many positions and is particularly popular for conversions where turn signals should not be visible or simply have no space.

For gluing or laminating,

E-approved for front and rear, suitable for vertical and horizontal installation.

A Width: 38 mm

C Height: 8 mm

D Depth: 12 mm

> 1 pair HIGHSIDER STAR-MX1 PRO MODUL LED turn signals clear glass <

LED built-in indicator for almost invisible installation. The HIGHSIDER STAR-MX1 PRO can be fitted in many positions and is particularly popular for conversions where turn signals should not be visible or simply have no space.

For gluing or laminating,

E-approved for front and rear, suitable for vertical and horizontal installation.

A Width: 38 mm

C Height: 8 mm

D Depth: 12 mm

> 1 pair of HIGHSIDER STAR-MX1 PRO MODUL LED turn signals smoked glass <

Smoke grey tinted indicator glass

approx. dimensions: length 40mm x width 25mm x depth 20mm

with lock nut / spacer washer and 20 mm M8 thread cable with approx. 17 cm length

12V / 1W

E-approval for front and rear (11/12)

> 1 pair of LED fairing turn signals drop shape edged black tinted <

Smoke grey tinted indicator glass

approx. dimensions: length 50mm x width 34mm x depth 22mm

With lock nut / spacer washer and 20 mm M8 thread Cable with approx. 17 cm length

12V / 0,5W

E-approval for front and rear (11/12)

> 1 pair of LED fairing turn signals drop shape rounded black tinted <

Smoke grey tinted indicator glass

approx. dimensions: length 49mm x width 28mm x depth 23mm

With lock nut / spacer washer and 20 mm M8 thread Cable with approx. 17 cm length

12V / 0,5W

E-approval for front and rear (11/12)

> 1 pair LED fairing indicator oval black tinted <

SHIN YO LED fairing indicator in robust plastic housing in black and clear glass.

The indicator can be screwed or glued and is E-tested for front and rear.

Dimensions:
Length: 92 mm
Width: 55 mm
Height: 33 mm
Hole spacing: 66 mm
Illuminant: 12V/0,36W

Scope of delivery: 1 pair

> 1 pair of SHIN YO LED fairing indicators <

SHIN YO LED Turn Signal MICRO DISC
The latest lighting technology in a robust round plastic housing and transparent glass, E-tested

Dimensions:
A: 18 mm
B: 37 mm
Threaded bolt: M6 x 16 mm

Scope of delivery: 1 pair

> 1 pair SHIN YO LED Turn Signal DISC Clear Glass <

SHIN YO HI-Power LED Turn Signal MC 1
The High Power LED is the most light-intensive LED variant ever. The latest lighting technology in a robust aluminum housing in black with clear glass, E-tested.

SHIN YO LED Indicator MICRO DISC
The latest lighting technology in a sturdy round plastic housing in black with tinted glass, E-tested
.
Dimensions:
A: 14 mm
B: 30.5 mm
Threaded bolt: M6 x 16 mm

Scope of delivery: 1 pair

> 1 Pair SHIN YO LED Indicator MICRO DISC <

SHIN YO MODUL 2 LED indicator with 3 SMDs
Very inconspicuous and tinted body made of plastic with SMD LED technology. This durable and powerful LED technology with specially adapted lens is brighter than normal LEDs with the same power consumption and enables an extremely small and flat design. The indicator has been tested for horizontal installation and is suitable for laminating or gluing in.

E-approved ONLY for rear

Dimensions:
Width: 15.5 mm
Height: 8.5 mm
Depth: 11 mm

> 1 pair of SHIN YO MODUL 2 LED turn signals <

SHIN YO LED indicator SWIFT in robust plastic housing in black with clear honeycomb lens

.

The indicator is attached with adhesive film and is E-tested for front and rear.
Dimensions:
Width: 36 mm
Height: 18.5 mm
Depth: 44.5 mm

> 1 pair SHIN YO LED fairing indicators SWIFT <

SHIN YO LED Turn Signal BULLET ROUND
Indicator with plastic housing,
Note: Only for rear E-tested

Dimensions:
A: 32 mm
B: 34 mm
Housing diameter: 41.8 mm

Scope of delivery: 1 pair
 

> SHIN YO LED Turn Signal BULLET ROUND <

Mounting bracket made of powder-coated stainless steel with M5 mounting hole for indicator with M8 bolt

incl. 1 pair of M8 rubber cover sleeves matt black for clean cable termination at the indicator

> 1 pair of indicator bracket BHW1 <

Bike carrier indicator bracket GBHV2 for turn signals with M8 thread

For dimensions see picture gallery.

> Bike carrier indicator bracket GBHV2 incl. 2 x M4 bolts, washers and nuts <

Bicycle luggage rack indicator bracket GBHV3

incl. 2 x M4 bolts, washers and nuts,

For dimensions see picture gallery.

Bicycle luggage rack indicator bracket GBHV3 incl. 2 x M4 bolts, washers and nuts

U-mounting bracket made of powder-coated stainless steel with M5 mounting slot for indicators with M8 bolts

incl. 1 pair of M8 rubber cover sleeves matt black for clean cable termination at the indicator

For dimensions see picture gallery.

indicator bracket BHW3

Mounting bracket made of powder-coated stainless steel with M4 mounting slot for indicator with M8 bolt

incl. 1 pair of M8 rubber cover sleeves matt black for clean cable termination at the indicator

1 pair of indicator bracket BHW2

Small, discreet and yet impossible to miss. The flexible indicator neck ensures a long service life

> 1 pair of rubber mounted oval mini LED turn signals tinted glass with black nut and black washer <

With running light turn signals on the bike, you are way ahead. The short design reduces vibrations and oscillations, which reduce the service life of the indicator.

> 1 pair 12 volt rubber mounted short LED running light turn signal <

Increase visibility with High Quality Universal LED running light indicators.

The outstanding design paired with the long service life of LED turn signals enhances any vehicle.

The longer design accentuates the running light.

Approved for front and rear.

> 1 pair of rubber-mounted running light indicators edge Pro Black <

SHIN YO LED turn signal SPADES
The latest lighting technology in black plastic housing with tinted glass, E-approved.

SHIN YO HI-Power LED Turn Signal MC 1
The High Power LED is the most light-intensive LED variant ever. The latest lighting technology in a robust aluminum housing in black with clear glass, E-tested.

motogadget has come up with the *mo.blaze tens1*, a tiny LED turn signal for front and rear that almost disappears on the vehicle due to its mini dimensions and barely noticeable design.

In operation, however, the *mo.blaze tens1* "grows" beyond itself and becomes a highly visible direction indicator. This is reinforced by an increased beam angle. So the light signals are noticed even better.

Price per pair

SHIN YO LED fairing indicator in robust plastic housing in black and clear glass.

The indicator can be screwed or glued and is E-tested for front and rear.

Dimensions:
Length: 92 mm
Width: 55 mm
Height: 33 mm
Hole spacing: 66 mm
Illuminant: 12V/0,36W

Scope of delivery: 1 pair

> 1 pair of SHIN YO LED fairing indicators <

SHIN YO LED indicator SWIFT in robust plastic housing in black with clear honeycomb lens

.

The indicator is attached with adhesive film and is E-tested for front and rear.
Dimensions:
Width: 36 mm
Height: 18.5 mm
Depth: 44.5 mm

> 1 pair SHIN YO LED fairing indicators SWIFT <

SHIN YO LED Turn Signal MICRO DISC
The latest lighting technology in a robust round plastic housing and transparent glass, E-tested

Dimensions:
A: 18 mm
B: 37 mm
Threaded bolt: M6 x 16 mm

Scope of delivery: 1 pair

> 1 pair SHIN YO LED Turn Signal DISC Clear Glass <

SHIN YO LED Indicator MICRO DISC
The latest lighting technology in a sturdy round plastic housing in black with tinted glass, E-tested
.
Dimensions:
A: 14 mm
B: 30.5 mm
Threaded bolt: M6 x 16 mm

Scope of delivery: 1 pair

> 1 Pair SHIN YO LED Indicator MICRO DISC <

SHIN YO LED Turn Signal BULLET ROUND
Indicator with plastic housing,
Note: Only for rear E-tested

Dimensions:
A: 32 mm
B: 34 mm
Housing diameter: 41.8 mm

Scope of delivery: 1 pair
 

> SHIN YO LED Turn Signal BULLET ROUND <

LED built-in indicator for almost invisible installation. The HIGHSIDER STAR-MX1 PRO can be fitted in many positions and is particularly popular for conversions where turn signals should not be visible or simply have no space.

For gluing or laminating,

E-approved for front and rear, suitable for vertical and horizontal installation.

A Width: 38 mm

C Height: 8 mm

D Depth: 12 mm

> 1 pair of HIGHSIDER STAR-MX1 PRO MODUL LED turn signals smoked glass <

HIGHSIDER ROCKET BULLET LED tail light, brake light, turn signal with black aluminum housing and tinted glass - for rear E-approved.

Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the reference to the past. In doing so, the soft, round shape supports the classic associations evoked in the viewer.

In the center 6 very bright SMD LEDs are installed. The outer ring consists of COBs (Chip On Board). Due to the new LED chip embedding for high power LEDs, a very high luminance is achieved with currently best possible efficiency and lifetime. In addition, higher light values can be achieved than with conventional LEDs.

The best comes at the end -the taillight and taillight / turn signal series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, sportsman or Scooter.

LED built-in indicator for almost invisible installation. The HIGHSIDER STAR-MX1 PRO can be fitted in many positions and is particularly popular for conversions where turn signals should not be visible or simply have no space.

For gluing or laminating,

E-approved for front and rear, suitable for vertical and horizontal installation.

A Width: 38 mm

C Height: 8 mm

D Depth: 12 mm

> 1 pair HIGHSIDER STAR-MX1 PRO MODUL LED turn signals clear glass <

SHIN YO MODUL 2 LED indicator with 3 SMDs
Very inconspicuous and tinted body made of plastic with SMD LED technology. This durable and powerful LED technology with specially adapted lens is brighter than normal LEDs with the same power consumption and enables an extremely small and flat design. The indicator has been tested for horizontal installation and is suitable for laminating or gluing in.

E-approved ONLY for rear

Dimensions:
Width: 15.5 mm
Height: 8.5 mm
Depth: 11 mm

> 1 pair of SHIN YO MODUL 2 LED turn signals <

SHIN YO MODUL 1 LED indicator with 5 SMDs, E-tested for front and rear
. Very unobtrusive and well-designed body made of plastic with SMD LED technology. This durable and powerful LED technology with specially adapted lens is brighter than normal LEDs with the same power consumption and allows for an extremely small and flat design. The indicator has been tested for horizontal installation and is suitable for laminating or gluing in.

Dimensions:
Width: 21.5 mm
Height: 8.5 mm
Depth: 11.5 mm

> 1 Pair SHIN YO MODUL 1 LED Blinker <

Intelligently disguised

The micro S Dark belongs to the compressed version "S" of the famous Kellermann micro 1000® series.In the new format, the micro S Dark reflects the strong trend towards even more compressed lights and opens up new design possibilities for motorcycles. Due to the drastic size reduction and the strongly tinted indicator’s glass, the "indicator" component disappears almost completely.
In action however the high performance LEDs provide a spectacularly bright light, which Kellermann indicators are now for! The well-known Kellermann HighPower LED Technology** and the new EXtranz®- Extreme Optical Transparency Technology enable an optimized light channeling. As the complete electronics of the micro S Dark are in the casing, this indicator can be plugged into the 12 volt net directly.* Combined at front and back the offer a perfect look. Suitable for all motorcycle models.*

* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.

ECE-tested for front and rear

• Strongly tinted glass – spectacularly bright
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Long Life Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5 x 0,5 x 6,5 mm thread
• European design protection

> 1 pair Kellermann indicator Micro S Dark, black, tinted glass, for front and rear <

A brilliant edge

The Rhombus S Extreme is one of the brightest Kellermann indicators available so far. In combination with a drastic reduction in size new design standards are set – not only for motorcycles! The Rhombus S Extreme is allowed for use on multiple applications including quads, cars and trailers (homologated according to ECE-R6). On motorcycles this indicator can be installed within twenty millimetres of the main headlamp, thus blending seamlessly into the visual appearance of the bike.

Three LEDs and the Kellermann HighPower LED Technology** generate an impressive and previously unattained bright signal. Due to this greater illumination power it is recognized more quickly in traffic providing for maximum road safety.*

^{* Electronical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.}

ECE-tested for front and rear

Applicable on all vehicles
(e. g. motorcycles, quads, cars, Super Seven, trailers, etc.)

• Extreme light power and brilliant optic
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5 x 0,5 x 6,5 mm thread
• European design protection

> 1 pair Kellermann Rhombus S Extreme, LED indicator, black, front & rear <

An edge in disguise

The Rhombus series is extended and now presents itself in a particular compact version! The drastic reduction in size allows for completely new design standards on the motorcycle: when not in use its miniature format and the characteristic tinted glass take undercover to the next level. In action however the high performance LEDs provide a spectacularly bright light, which Kellermann indicators are now for! The well-known Kellermann HighPower LED Technology** and the new EXtranz- Extreme Optical Transparency Technology enable an optimized light channeling. As the complete electronics of the Rhombus S Dark are in the casing, this indicator can be plugged into the 12 volt net directly.*Combined at front and back the offer a perfect look. Suitable for all motorcycle models.*

^{* Electronical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction.}

ECE-tested for front and rear

• Strongly tinted glass – spectacularly bright
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5 x 0,5 x 6,5 mm thread
• European design protection

> 1 pair Kellermann Rhombus S Dark, LED indicator, tinted glass <

A talented edge

Our innovative indicator-brake-rear light combination maximizes your individual styling option at the rear of your bike! Optically fully disguised due to its reduction in size and an all-rounder at the same time: The original tail light can be eliminated and replaced by beaming double rear lights based on high-performance LEDs and the Kellermann HighPower LED Technology.** Inconspicuous at rest, unbeatable in action: The brake light of the Rhombus S DF Dark warns with an intensity that is second to none. It keeps the following traffic at distance, thus enhancing safety on the road. As the complete electronics are in the casing the Rhombus S DF Dark allows for a significant reduction in weight. Suitable for all motorcycle models.*

^{* Electronical accessories may be required to match indicators signal frequency.
** Combination out of the IC operated Longlife Protection Guard system with high-performance-LED latest type of construction.}

ECE-tested for rear

• Replaces the existing brake/rear light as well as the indicator
• Sensational new rear look
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5 x 0,5 x 6,5 mm thread
• European design protection

> 1 pair Kellermann Rhombus S DF Dark, LED indicator 3 in 1, tinted glass, rear left and right <

Sensation

With the Atto®/Atto® Dark we made the almost impossible possible: This indicator is extremely small and spectacularly bright at the same time. Compact and illuminating power: With this combination the Atto®/Atto® Dark is a real sensation!

This is our most compact indicator ever. For comparison: The light surface of the Atto®/Atto® Dark would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto®/Atto® Dark basically disappears on the motorcycle. This indicator will only grab your attention when it really has to!

The Atto®/Atto® Dark flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! We advise not to look for too long into the beam of this little power house.

The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology.

The complete electronics of the Atto®/Atto® Dark are in the casing, this indicator can be plugged into the 12 volt net directly.*

* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.

ECE-tested for front and rear

• sensationally small, spectacularly bright
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5x0,5x6,5 fastening screw
• Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm
• European design protection

> 1 pair Kellermann Atto Dark, LED mini indicator, tinted glass, front and rear on both sides <

Sensation

With the Atto® we made the almost impossible possible: This indicator is extremely small and spectacularly bright at the same time. Compact and illuminating power: With this combination the Atto® is a real sensation!

This is our most compact indicator ever. For comparison: The light surface of the Atto® would fit four times on a 1 Cent coin! This consequent reduction offers completely new styling options for the motorcycle. In fact, the Atto® basically disappears on the motorcycle. This indicator will only grab your attention when it really has to!

The Atto® flashes with the intensity that has made the products of Kellermann legendary and the company over and over again a trendsetter in this segment. This indicator offers maximum illuminating power at minimal size, in short: sensationally small, spectacularly bright! We advise not to look for too long into the beam of this little power house.

The optimized light channeling is managed through a smart system of lenses and reflectors. This combination is possible thanks to the use of the well known Kellermann HighPower LED technology**, along with the new EXtranz® - Extreme Optical Transparency technology.

The complete electronics of the Atto® are in the casing, this indicator can be plugged into the 12 volt net directly.*

^{* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.}

ECE-tested for front and rear

• sensationally small, spectacularly bright
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5x0,5x6,5 fastening screw
• Measure: Length 14mm, max. diameter 10mm, glass diameter 7,8mm
• European design protection

> 1 pair Kellermann Atto, LED mini indicator, black, front and rear on both sides <

A sensational all-rounder

A 3in1 sensation as it hasn’t been seen before: The Atto® DF is the latest and by far most spectacular member of Kellermann’s successful Atto® series! The probably world’s smallest street legal indicator is now available in triple function with an integrated rear and brake light. Behind the extremely small yet sensationally bright Atto® DF lays a multifunctional all-rounder: At the rear it is visually almost completely disguised with a light surface, which would fit four times on a 1 Cent coin! In result the rear of the motorcycle can be designed as clean and individual as never before. However, in action the Atto® DF shines with an intensity which has made Kellermann products legendary – it’s not the size but the illumination power that counts. Indicators, rear and brake light warn with an uncompromising intensity, clearly signalling the following traffic to keep its distance. Kellermann’s well-known HighPower LED technology** and EXtranz® - Extreme Optical Transparency Technology manage an optimized light channelling through a smart system of lenses and reflectors and thus enabling this combination of sensational brilliance and minimal size. The Atto® DF can be combined with various other series e.g. Atto® or Bullet 1000®. As the complete electronics are in the casing the Atto® DF allows for a significant reduction in weight.

^{* Possibly electronic equipment is needed to regulate the flashing rate.
** Combination out of the IC operated Longlife Protection Guard® system with high-performance-LEDs latest type of construction.}

ECE-tested for rear

• replaces the existing rear / brake light as well as indicators
• sensational new rear look
• EXtranz® - Extreme Optical Transparency Technology
• Kellermann HighPower LED Technology
• Longlife Protection Guard®, IC operated, 330 kHz
• High quality metal housing
• Suitable for 12 volt DC applications
• With M5x0,5x6,5 fastening screw
• European design protection

> 1 pair Kellermann Atto DF, LED mini indicator 3 in 1, black, rear on both sides <

Smoke grey tinted indicator glass

approx. dimensions: length 49mm x width 28mm x depth 23mm

With lock nut / spacer washer and 20 mm M8 thread Cable with approx. 17 cm length

12V / 0,5W

E-approval for front and rear (11/12)

> 1 pair LED fairing indicator oval black tinted <

Smoke grey tinted indicator glass

approx. dimensions: length 50mm x width 34mm x depth 22mm

With lock nut / spacer washer and 20 mm M8 thread Cable with approx. 17 cm length

12V / 0,5W

E-approval for front and rear (11/12)

> 1 pair of LED fairing turn signals drop shape rounded black tinted <

Mounting bracket made of powder-coated stainless steel with M5 mounting hole for indicator with M8 bolt

incl. 1 pair of M8 rubber cover sleeves matt black for clean cable termination at the indicator

> 1 pair of indicator bracket BHW1 <

Adapter clamp made of aluminum Ø 28.6mm for mounting on the top tube of the seat shell on the AZUB recumbent bike.

Add a pair of BHW1and matching nuts and bolts.

See the mounting example in the support forum .

Mounting bracket made of powder-coated stainless steel with M5 mounting hole for indicator with M8 bolt

incl. 1 pair of M8 rubber cover sleeves matt black for clean cable termination at the indicator

and additional mounting material 2 x bolt M6x12 + 4x washer 6,2 + 2x nut M6 self-locking

for mounting on the luggage carrier of the ICE Adventure

> 1 pair of indicator bracket BHW1 <

Mounting bracket made of powder-coated stainless steel with M4 mounting slot for indicator with M8 bolt

incl. 1 pair of M8 rubber cover sleeves matt black for clean cable termination at the indicator

1 pair of indicator bracket BHW2

U-mounting bracket made of powder-coated stainless steel with M5 mounting slot for indicators with M8 bolts

incl. 1 pair of M8 rubber cover sleeves matt black for clean cable termination at the indicator

For dimensions see picture gallery.

indicator bracket BHW3

Bike carrier indicator bracket GBHV2 for turn signals with M8 thread

For dimensions see picture gallery.

> Bike carrier indicator bracket GBHV2 incl. 2 x M4 bolts, washers and nuts <

Bicycle luggage rack indicator bracket GBHV3

incl. 2 x M4 bolts, washers and nuts,

For dimensions see picture gallery.

Bicycle luggage rack indicator bracket GBHV3 incl. 2 x M4 bolts, washers and nuts