velorian e-bike blinkerset ready to fit for a Winther Kangaroo

The blinkerbox contains the control electronics for the velorian e-bike blinkerset.

The blinkerbox is preconfigured for operation with 2 push-buttons/double push-buttons. If ordered with a toggle switch, it is configured by us for operation with a toggle switch before delivery.

It meets the current requirements of the StVZO in Germany for turn signals on motorised two-wheelers, multi-track bicycles and the EMC directive for e-bikes.

The two approx. 15 cm long connection cables to the front and rear have waterproof plugs. The approx. 150 cm power supply cable has no plug

The blinkerbox e-line alpha22 Plug&Ride is 91mm long, 34 mm wide and 21mm high. The length is measured over the mounting wings.

> blinkerbox e-line alpha22 Plug&Ride <

The components for operating the velorian Plug&Ride blinkerset for cargo bikes in a set:

• Toggle switch for blinkerset 2.0 Plug&Ride
• Status-LED for velorian blinkerset 2.0 Plug&Ride
• velorian cable splitter Cargo Base Plug&Ride
• velorian cable splitter Cargo - Toggle switch - Status LED

Attention: The Cargo Splitters are 4-pole and require 4-pole extension cables.

SHIN YO LED indicator SWIFT in robust plastic housing in black with clear honeycomb lens

.

The indicator is attached with adhesive film and is E-tested for front and rear.
Dimensions:
Width: 36 mm
Height: 18.5 mm
Depth: 44.5 mm

> 1 pair SHIN YO LED fairing indicators SWIFT <

SHIN YO LED indicator SWIFT in robust plastic housing in black with clear honeycomb lens

.

The indicator is attached with adhesive film and is E-tested for front and rear.
Dimensions:
Width: 36 mm
Height: 18.5 mm
Depth: 44.5 mm

> 1 pair SHIN YO LED fairing indicators SWIFT <

Clamp made of aluminum for mounting on the top tube of the seat shell on the AZUB recumbent bike.

Additional brackets like our BHW1 are needed.

See the mounting example in the support forum .

• Extension cable 2-pin 50 cm Plug&Ride to the front indicators
• Extension cable 2-pin 30 cm Plug&Ride to the front indicators
• Splitter 3-pin indicator Plug&Ride to the front indicators

• Extension cable 3-pin 100 cm Plug&Ride to the rear indicators
• Extension cable 3-pin 30 cm Plug&Ride to the rear indicators
• Splitter 3-pin indicator Plug&Ride to the rear indicators

• Extension cable 4-pin 100 cm Plug&Ride to handlebars

• -10 Cable tie 200 x 3.6 mm, black
• -20 cable ties 100 x 2.5 mm, black

3M 3-way Scotchlok single core connector UR2

10 pieces wire connector for the secure connection of plastic-insulated telecommunication and signalling cables.
For connecting two or three copper cores, even with different core thicknesses
No stripping of the cores necessary
Factory-filled with sealant to protect against corrosion and moisture
Maximum outer diameter 2.08 mm
Maximum wire diameter 0.4-0.9 mm

• Battery pack incl. charger, waterproof, 8.4V, 6000mAh
• 30 cm connection cable with matching plug for the battery pack on the blinkerbox instead of the 2-wire cable without plug

When the rechargeable battery is selected, the indicator box is supplied with a suitable plug attached to an approx. 30 cm long power connection cable.

Without the battery, the indicator box is supplied with a 1500 mm power connection cable and can then be connected e.g. to the light connection.

The battery is designed for battery lights on bicycles and is designed to be attached to any bicycle frame with its rubberised back and the included wide Velcro strap.

The connector plug is disconnected from the consumer for charging and connected to the mains adapter.

Extension cable 3-pin 10 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 15.5 cm.

Extension cable 3-pin 30 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 35.5 cm.

Extension cable 3-pin 50 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 55.5 cm.

Extension cable 3-pin 100 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 105.5 cm.

Extension cable 6-pin 10 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 15.5 cm.

Extension cable 6-pin 20 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 25.5 cm.

Extension cable 6-pin 30 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 35.5 cm.

Extension cable 6-pin 50 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 55.5 cm.

Extension cable 6-pin 100 cm for velorian blinkerset 2.0 Plug&Ride.

The total length with plug is 105.5 cm.