velorian e-bike blinkerset ready to fit for Urban Arrow Family

SKU: 9010147310

GTIN: 4262357280207

The ready-to-fit blinkerset suitable for the Urban Arrow Family for retrofitting consisting of:

velorian blinkerbox e-line alpha22
Switch or push-button with plug connector
indicator bracket depending on selection
indicator depending on selection
the necessary extension cables
optional cable ties and additional battery

and the necessary mounting material.

Control unit, indicators and brackets are freely selectable. With the pre-set brackets and cables, the indicator set fits the recumbent as shown in the picture gallery.
See also the attached installation instructions at the bottom of the page.

If the bike is equipped differently from the version shown in the gallery, usually this concerns the luggage rack, please check the cable lengths and the rear indicator bracket.

The blinkerbox that we place on the frame usually also fits under the engine cover.

See our > assembly example < in the support forum.

Category: Cargo Bike

Price as configured

Available immediately

Delivery time: 7 - 8 Workdays

Blinkerbox e-line alpha22 Plug&Ride

1x blinkerbox e-line alpha22 Plug&Ride +99,96 €
Show description

The blinkerbox contains the control electronics for the velorian e-bike blinkerset.

The blinkerbox is preconfigured for operation with 2 push-buttons/double push-buttons. If ordered with a toggle switch, it is configured by us for operation with a toggle switch before delivery.

It meets the current requirements of the StVZO in Germany for turn signals on motorised two-wheelers, multi-track bicycles and the EMC directive for e-bikes.

The two approx. 15 cm long connection cables to the front and rear have waterproof plugs. The approx. 150 cm power supply cable has no plug

The blinkerbox e-line alpha22 Plug&Ride is 91mm long, 34 mm wide and 21mm high. The length is measured over the mounting wings.

> blinkerbox e-line alpha22 Plug&Ride <

Operating the cargo bike indicators

1x Cargo bike indicator operation with toggle switch, status LED with matching cable splitter +59,20 €
Show description
The components for operating the velorian Plug&Ride blinkerset for cargo bikes in a set:
Attention: The Cargo Splitters are 4-pole and require 4-pole extension cables.

Indicator front - optional

Show description

SHIN YO LED indicator SWIFT in robust plastic housing in black with clear honeycomb lens

.

The indicator is attached with adhesive film and is E-tested for front and rear.
Dimensions:
Width: 36 mm
Height: 18.5 mm
Depth: 44.5 mm
A hole with a diameter of approx. 8 mm must be drilled at the mounting position for the cable.
> 1 pair SHIN YO LED fairing indicators SWIFT <

Front indicator bracket - optional

Show description

Bicycle luggage rack indicator bracket GBHV4
incl. 2 x M5 bolts, washers and nuts
For dimensions see picture gallery.

https://shop.velorian.de/Bicycle-luggage-rack/indicator-bracket-GBHV4

Indicator rear - optional

Show description

1 pair of short Plug&Ride running light indicators with connectors.

With running light indicators on the bike, you are way ahead of the game.

The short design minimises oscillations and vibrations, which reduce the service life of the indicator.

1 pair of short running light indicators for velorian blinkerset 2.0 Plug&Ride

Indicator brackets rear - optional

Show description

Clamp made of aluminum for mounting on the top tube of the seat shell on the AZUB recumbent bike.

Additional brackets like our BHW1 are needed.

See the mounting example in the support forum .

Urban Arrow cable set - optional

1x extension cable set Plug&Ride for the Urban Arrow Family +83,16 €
Show description
- Extension cable 3-pin 100 cm Plug&Ride to the front indicators
- Extension cable 3-pin 10 cm Plug&Ride to the front indicators
- Splitter 3-pin indicator Plug&Ride to the front indicators
- Extension cable 3-pin 50 cm Plug&Ride to the rear indicators
- Extension cable 3-pin 10 cm Plug&Ride to the rear indicators
- Splitter 3-pin indicator Plug&Ride to the rear indicators
- Extension cable 4-pin 50 cm Plug&Ride to handlebars
- Extension cable 4-pin 20 cm Plug&Ride to handlebars
- Extension cable 6-pin 20 cm Plug&Ride

Blinkerset cable ties Set #1 - optional

1x Blinkerset cable ties set #1 +2,50 €
Show description
- -10 Cable tie 200 x 3.6 mm, black
- -20 cable ties 100 x 2.5 mm, black

3-way cable connector for the power connection - optional

Show description

3M 3-way Scotchlok single core connector UR2

10 pieces wire connector for the secure connection of plastic-insulated telecommunication and signalling cables.
For connecting two or three copper cores, even with different core thicknesses
No stripping of the cores necessary
Factory-filled with sealant to protect against corrosion and moisture
Maximum outer diameter 2.08 mm
Maximum wire diameter 0.4-0.9 mm

Separate battery - optional

1x Battery pack incl. charger and connection cable on the indicator box +43,09 €
Show description
- Battery pack incl. charger, waterproof, 8.4V, 6000mAh
- 30 cm connection cable with matching plug for the battery pack on the blinkerbox instead of the 2-wire cable without plug
When the rechargeable battery is selected, the indicator box is supplied with a suitable plug attached to an approx. 30 cm long power connection cable.

Without the battery, the indicator box is supplied with a 1500 mm power connection cable and can then be connected e.g. to the light connection.

The battery is designed for battery lights on bicycles and is designed to be attached to any bicycle frame with its rubberised back and the included wide Velcro strap.

The connector plug is disconnected from the consumer for charging and connected to the mains adapter.

Your configuration

incl. 19% VAT , plus shipping costs (Paket)