The ready-to-fit blinkerset suitable for pfautec PF Mobility Disco for retrofitting consisting of:
With the pre-set brackets and cables, the indicator set fits the bike as shown in the picture gallery.
See also the attached installation instructions at the bottom of the page.
If the bike is equipped differently from the version shown in the gallery, usually this concerns the luggage carrier, please check the cable lengths and the rear indicator bracket.
The blinkerbox contains the control electronics for the velorian e-bike blinkerset.
The indicator box is preconfigured for operation with a toggle switch. If ordered with 2 buttons/double buttons, it will be configured by us for operation with 2 buttons/double buttons before delivery.
It meets the current requirements of the StVZO in Germany for turn signals on motorised two-wheelers, multi-track bicycles and the EMC directive for e-bikes.
The two approx. 15 cm long connection cables to the front and rear have waterproof plugs. The approx. 150 cm power supply cable has no plug
The blinkerbox e-line alpha22 Plug&Ride is 91mm long, 34 mm wide and 21mm high. The length is measured over the mounting wings.
> blinkerbox e-line alpha22 Plug&Ride <
The components for operating the velorian Plug&Ride indicator set in a set.
The components for operating the velorian Plug&Ride blinkerset in the set.
1 pair of clear glass LED turn signals
Larger, brighter, and impossible to miss. The indicator lens is untinted and has a small red light surface at the rear to increase visibility.
Cable length 150 mm + plug
1-pair-LED-turn-signals-clear-glass-velorian-blinkerset-PlugRide
1 pair of short Plug&Ride running light indicators with connectors.
With running light indicators on the bike, you are way ahead of the game.
The short design minimises oscillations and vibrations, which reduce the service life of the indicator.
1 pair of short running light indicators for velorian blinkerset Plug&Ride
1 pair of rubber-mounted mini LED turn signals with black nut and black washer
Small, discreet and yet impossible to miss. The flexible indicator neck ensures a long service life
cable length 150mm + plug
1 pair of Mini LED turn signals for velorian Blinkerset Plug&Ride
SHIN YO LED indicator SWIFT in robust plastic housing in black with clear honeycomb lens
.
The indicator is attached with adhesive film and is E-tested for front and rear. Dimensions: Width: 36 mm Height: 18.5 mm Depth: 44.5 mm
> 1 pair SHIN YO LED fairing indicators SWIFT <
1 pair of short Plug&Ride running light indicators with retrofitted connectors.
1 pair of short running light indicators for velorian blinkerset Plug&Ride retrofitted
Increase visibility with high-quality universal LED running lights.
The outstanding design combined with the long service life of LED indicators enhances any vehicle.
The longer design shows off the running lights to their best advantage.
Approved for front and rear use.
> 1 pair of edge running lights Pro Black Plug&Ride retrofitted <
Universal indicator bracket for mounting turn signals on 22 mm handlebars The mounting opening is oval up to 23 mm and thus avoids unsightly scratches on the aluminium handlebars.
The universal indicator bracket can be combined with the velorian indicator switch or indicator button to form a unit, thus saving space on the handlebar.
incl. 1 pair of M8 rubber cover sleeves matt black for clean cable termination at the indicator
> 1 pair of velorian universal indicator bracket <
Mounting bracket made of powder-coated stainless steel with M5 mounting hole for indicator with M8 bolt
> 1 pair of indicator bracket BHW1 <
Mounting bracket made of powder-coated stainless steel with M4 mounting slot for indicator with M8 bolt
1 pair of indicator bracket BHW2
U-mounting bracket made of powder-coated stainless steel with M5 mounting slot for indicators with M8 bolts
For dimensions see picture gallery.
indicator bracket BHW3
1 pair of turn signal bracket for e.g. mounting turn signals on the Bowden cable brake lever. left and right stop
including 1 pair M8 rubber cover sleeve matt black
> 1 pair of turn signal bracket for mounting turn signals on the Bowden cable brake lever <
Indicator bracket 275 mm long for indicators with M8 thread
The bracket fits on rear light brackets with 5 and 8 cm hole spacing. For further dimensions, see the picture gallery.
Material: Aluminium and stainless steel
https://shop.velorian.de/Indicator-bracket-275-mm-long-M8
Bicycle luggage rack indicator bracket GBHV4 incl. 2 x M5 bolts, washers and nuts For dimensions see picture gallery.
https://shop.velorian.de/Bicycle-luggage-rack/indicator-bracket-GBHV4
Retro is in vogue. This is a suitable indicator for retro bicycles and gives the bike an individual, distinctive look.
Power consumption:
2 mounting brackets made of powder-coated stainless steel with M5 mounting hole for indicators with M8 bolts incl. 1 pair of M8 rubber cover sleeve matt black for clean cable termination on the indicator and additional fixing material 2x screw M6x50 + 2x body washer M6 6.4 x 20 for mounting e.g. on the armrests of the PF Mobility Disco
360° rotatable mount for frame tubes with a diameter of 12–28 mm, combined with the BHW1 indicator bracket
Bike carrier indicator bracket GBHV2 incl. 2 x M4 bolts, washers and nuts for turn signals with M8 thread
Made of powder-coated stainless steel with M5 mounting holes and for indicators with M8 bolts
> Bike carrier indicator bracket GBHV2 <
Corning 3-way single core connector UR2
Wire connector for the secure connection of plastic-insulated telecommunication and signalling cables. For connecting two or three copper cores, even with different core thicknesses No stripping of the cores necessary Factory-filled with sealant to protect against corrosion and moisture Maximum outer diameter 2.08 mm Maximum wire diameter 0.4-0.9 mm
10 x Corning 3-way single core connector UR2
10 pieces wire connector for the secure connection of plastic-insulated telecommunication and signalling cables. For connecting two or three copper cores, even with different core thicknesses No stripping of the cores necessary Factory-filled with sealant to protect against corrosion and moisture Maximum outer diameter 2.08 mm Maximum wire diameter 0.4-0.9 mm
When the rechargeable battery is selected, the indicator box is supplied with a suitable plug attached to an approx. 30 cm long power connection cable.
Without the battery, the indicator box is supplied with a 1500 mm power connection cable and can then be connected e.g. to the light connection.
The battery is designed for battery lights on bicycles and is designed to be attached to any bicycle frame with its rubberised back and the included wide Velcro strap.
The connector plug is disconnected from the consumer for charging and connected to the mains adapter.
Extension cable 3-pin 10 cm for velorian blinkerset Plug&Ride.
The total length with plug is 15.5 cm.
Extension cable 3-pin 30 cm for velorian blinkerset Plug&Ride.
The total length with plug is 35.5 cm.
Extension cable 3-pin 50 cm for velorian blinkerset Plug&Ride.
The total length with plug is 55.5 cm.
Extension cable 3-pin 100 cm for velorian blinkerset Plug&Ride.
The total length with plug is 105.5 cm.
Cable splitter - splitter indicator - for velorian blinkerset Plug&Ride
3-pin to 2 x 2-pin
The connection for the right indicator is marked red or white.
Total length 18.5 cm incl. plug
Extension cable 6-pin 10 cm for velorian blinkerset Plug&Ride.
Extension cable 6-pin 20 cm for velorian blinkerset 2.0 Plug&Ride.
The total length with plug is 25.5 cm.
Extension cable 6-pin 30 cm for velorian blinkerset Plug&Ride.
Extension cable 6-pin 50 cm for velorian blinkerset Plug&Ride.
Extension cable 6-pin 100 cm for velorian blinkerset Plug&Ride.
incl. 19% VAT , plus shipping costs
There are no reviews yet.
